Diodes combined laser sound system rgb pro laser light 1500mW 2000mW with the best quality.
7 working days after payment
AC 90-240V. 50-60Hz±10%
Beam size @aperture
green-520nm 120mW diode
ILDA work with Laser dock
1)RGB laser +SD Card interface,there is a free ishow software in a SD card, by which you can edit logos,words,pictures,animation by yourself.
2) There are more than 600 pcs amazing beam&animation programs inside of SD card(it ,some animations are copied from pangolin quick show software,Importantly you can select whatever programs you like in SD card,or you can edit your own logos,words etc,then merge them into a your own unique show,meanwhile you can adjust the size of patterns.
3)If you buy the laser light without SD card interface from others ,you can not edit laser show b youself,and it usually only has simple beam effects,which do not have animation programs at all, you need to buy software for animation,Also you can not get as good beam effects as mine,can not choose single color and can not adjust the size of patterns )
1.What are the main kinds of laser effects used in light shows?
A:There are two main classes of laser effects, beam effects and screen effects. In a beam effect, the laser beam traveling through the air creates the effect. A screen effect is any image or optical effect that requires a screen or other projection surface to be visible.
2.What kind of beam effects can I see at laser shows?
A:There are two main types of beam effects, static and dynamic. Static beams are usually turned on an off and may be bounced from mirrors to create a beam matrix or sculpture in the air. Dynamic beam effects are moving beams that may include sheets, fans, cones or blades of light moving above and through the audience.
3.Why don't I see a lot of beam effects at some shows? A:Some shows are designed to be graphics and animation intensive and some shows are designed to have lots of beam effects. Beam effects take more laser power to project so some venues do not use them since their lasers are not powerful enough. I n other cases the venue does not have the clearances or permits needed for safe projection of beam effects.
4.When you see laser animations at shows do they just scan the pictures in ?
A: In traditional character animation each picture has to be individually hand drawn (digitised) usually from artwork prepared by an animator. The images (frames) are then played back in rapid succession creating the illusion of movement just like a classic Disney movie or Saturday morning cartoon. Here are some laser frames of a dancing man - you can see the differences from frame to frame (also see Laser Graphics Systems).
5. Are there other kinds of laser animations?
A:There are sequential frame animations and object animation, logo shows, text. In sequential frame animation, a sequence of slightly different frames is projected giving the illusion of a character moving just like in a cartoon. In object animation, the images on the screen are created by the computer moving or rotating an object. An example would be a company logo spinning around. The computer can add perspective or perform line removal to give the illusion that the 2D image projected onto the screen is a 3D object.
6. Can I put my hand into a laser beam at a show?
A:Generally, NO! You can safely put your hands into any beams that are scanned onto the audience as they are dynamic and the power levels are safe. Static beams (unmoving beams) can be dangerous and can cause burns or ignition of clothing - never put you hand into a static laser beam. You should never attempt to reflect a laser beam with a mirror or watch crystal as this may direct it into someone else's eyes causing vision damage.
7.Do you have to be licensed to do laser shows?
A:The rules and regulations on public laser shows and displays different from country to country although most countries follow the IEC-825 regulations. If you plan to perform a public laser show, check with the authorities having jurisdiction over radiation protection and health in your area.
8. How do they control the colours of the laser in shows?
A: The simplest form of colour control is called a colour box. This uses dichroic filters mounted on actuator arms to select one of 7 possible colours combinations (red, green, blue, yellow, cyan, magenta and white) by subtractive colour. In full colour displays, an acousto-optic device called a is used to control the brightness of each line allowing for a full spectrum of projected colours by additive colour.
Packaging & Shipping
These great laser show devices would be packed in the professional flight case if you wish, the normally package would be packed in the general carton.
• We will ship the products via air-express,which ensure our customers to test soon;Urgent orders with big quantity are supported by DHL,UPS,FEDEX,EMS,TNT,etc.We will choose the most efficient methods for you.
• Air shipping & sea shipping are acceptable,we provide D2D services when you choose the air shipping, FOB,CNF,CIF prices are available,and we can quote to you according to your preferred port in China.
Shenzhen Optlaser Technologies Co., Ltd was founded in 2007, and has plant area of about 6000 square meters, including 200 square meters of the level dust-free workshop and 600 square of grade clean workshop. Optlaser is a high-tech based enterprise which foots on technology innovation and wholly owned independent intellectual property rights of R & D , production and sales.
Optlaser has about 368 employees in total, all of the developer are bachelor or above, some of the core developers have more than 15 years experience in developing optical and electronic products. We are in the leading head in the field of development and application of the laser in China.
We have 10 years professional experience in manufacturing laser module and laser light. We got a series of related certificates. Our products are prevailing in US and EU laser market, and we have stable and long-time business cooperation with some well-know enterprise in EU and US. We have the UL/FCC/IP44/ROHS certificates for the power adapters and EMC/CE/EN60825/ROHS/IP65/FCC for the laser lights, and also we have WAL-MART audits and SGS audits for the factory.