1 PC EACH CARTON, OR CUSTOMISED PACKED IN FLIGHTCASE.
Shipped in 7 working days after payment
New Laser Products, 5W RGB Analog Laser Laser Stage Lighting, Advertise Lasers, Aniamtion, Fixture with DMX512, ILDA.
vThis equipment is not waterproof,keep it from rain,moisture and liquids.
v Do not install the product or project the beam onto inflammable,surfaces.
Minimum distance is 5 M
v The product is only intended for installation,operation and maintenance by
v Product should install in a cool place.Keep away from the wall 50cm
v Avoid direct exposure to the light from the lamp.The light is harmful to eyes.
v Keep the optical system clean.Do not touch the laser reflect lens with bare hands.Do not use any alcohol liquid or any other liquid to clean the optical system.Use medicinal absorbent cotton to clean it.
v Electrical connection must only be carried out by qualified personnel.
v Before installation,ensure that the voltage and frequency of power supply match the power requirement of the product.
v It is essential that each product is correctly earthed and that electrical installation
v conforms to all relevant standards.
v Do not connect this device to any other types of dimmer apparatus.
v Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the power-cord come into contact with other cables.Only handle the power-cord by the plug.Never pull out the plug by tugging the power-cord
v There is no user serviceable parts inside the product,do not open the housing and never operate the product with the cover removed.
If you have any questions,don't hesitate to consult our dealer or manufacturer.
L5000-RGB laser adopts embedded technology which enable laser moving,scaling,rotating,turn spin and gradually draw,animation,text,broken pen,wave laser effect can be achieved easily.
Unique functions as following:
1.Through DMX-512 Controller,you can select auto or sound control mode or to play built-in laser effects.
2.Through menu to set up scanner speed,laser color,X opposition,Y opposition
3.Unique sound control technology.Laser effect can response according to sound
Laser power /wavelength
1x1000mW Green (520nm )
1 x 3500mW Blue (445nm-455nm )
3*5mm at aperture
256 pieces built-in laser patterns
RGB full color
DMX-512 international standard signal
31(L)x 21(w) x 15(H) cm
Packaging & Shipping
These great laser show devices would be packed in the professional flightcase if you wish, the normally package would be packed in the general carton.
3,000-5,000 square meters
5th floor, building A, Libang Tech, Xitian village, Gongming town, shenzhen 518106
No. of Production Lines:
OEM Service Offered Design Service Offered
Annual Output Value:
Above US$100 Million
Research & Development
There is/are 11 - 20 People R&D Engineer(s) in the company.
Units Produced (Previous Year)
Highest Ever Annual Output
laser module, laser stage light, garden lights
The product warranty period is 12 months, can provide free maintenance service software or hardware failure due to quality problems caused by the product itself.
During the warranty period, the product To return the original repair, the buyer need to pay between transportation costs, and we should follow the recommendations of transport, as a result of the buyer does not obey our propositions lead to additional costs transport (such as taxes) borne by the buyer; no need to return the original, such as repair, we will provide the appropriate maintenance information and instruction manual to the seller, according to the actual situation may send appropriate accessories for the buyer and negotiate whether to replace damaged parts should be returned Transportation costs incurred during borne by the buyer.
Man-made damage, broken, into the water, moisture, to make alterations or demolition of the product, the need for the charging process, such as irreparable fault, not provide warranty service.
After the warranty period, if the product fails, the company still provide free repair, for replacement parts, we only charge fees related accessories, such products during the additional costs (such as products need to return to the original, or the buyer requests us Send repair parts) be borne by the buyer.
Q: What are the main kinds of laser effects used in light shows?
A: There are two main classes of laser effects, beam effects and screen effects. In a beam effect, the laser beam traveling through the air creates the effect. A screen effect is any image or optical effect that requires a screen or other projection surface to be visible.
Q: What kind of beam effects can I see at laser shows?
A:There are two main types of beam effects, static and dynamic. Static beams are usually turned on an off and may be bounced from mirrors to create a beam matrix or sculpture in the air. Dynamic beam effects are moving beams that may include sheets, fans, cones or blades of light moving above and through the audience.
Q: Why don't I see a lot of beam effects at some shows? A: Some shows are designed to be graphics and animation intensive and some shows are designed to have lots of beam effects. Beam effects take more laser power to project so some venues do not use them since their lasers are not powerful enough. I n other cases the venue does not have the clearances or permits needed for safe projection of beam effects.
Q: When you see laser animations at shows do they just scan the pictures in ?
A:In traditional character animation each picture has to be individually hand drawn (digitised) usually from artwork prepared by an animator. The images (frames) are then played back in rapid succession creating the illusion of movement just like a classic Disney movie or Saturday morning cartoon. Here are some laser frames of a dancing man - you can see the differences from frame to frame (also see Laser Graphics Systems).
Q: Are there other kinds of laser animations?
A: There are sequential frame animations [sometimes called character animation which is discussed above] and object animation. In sequential frame animation, a sequence of slightly different frames is projected giving the illusion of a character moving just like in a cartoon. In object animation, the images on the screen are created by the computer moving or rotating an object. An example would be a company logo spinning around. The computer can add perspective or perform line removal to give the illusion that the 2D image projected onto the screen is a 3D object.
Q: Can you get rich doing laser light shows?
A:NO! The laser and computer equipment, the personnel needed and the costs of producing the shows are all very high. You can pursue lasers as a fun and interesting hobby since low power and diode lasers are available from many sources. You can also design and build your own simple effects generation equipment and low cost scanners are available. Professional Laser show companies spend thousands of dollars and hundreds of hours creating the shows and displays that you enjoy. While you cannot get rich, you can make a reasonable living doing laser light shows.
Q: Can I put my hand into a laser beam at a show?
A:Generally, NO! You can safely put your hands into any beams that are scanned onto the audience as they are dynamic and the power levels are safe. Static beams (unmoving beams) can be dangerous and can cause burns or ignition of clothing - never put you hand into a static laser beam. You should never attempt to reflect a laser beam with a mirror or watch crystal as this may direct it into someone else's eyes causing vision damage.
Q: Where can I found out more about how laser light shows work?
A: The How Laser Shows Work section of this web site has a diagram of a laser display system you can click on. Each part of the system is more fully explained on the accompanying pages. There are not many books available on the subject but you can find a short bibliography in the Laser Science Project sections as well a glossary of terminology, which gives more information about laser displays.
Q: Do you have to be licensed to do laser shows?
A: The rules and regulations on public laser shows and displays differ from country to country although most countries follow the IEC-825 regulations. In the USA laser projection equipment needs a 'variance' and each show must be reported and have a 'site variance' issued by the CDRH. In Canada public shows and displays must be reported to the Radiation Protection Bureau in Ottawa. If you plan to perform a public laser show, check with the authorities having jurisdiction over radiation protection and health in your area.
Q: How do they control the colours of the laser in shows?
A: Lasers are not like regular lights than can have their colour changed by placing gels (filters) in front of them. Lasers produce only certain colours (frequencies; also called lines) of light. several frequencies.To produce a colour laser display, you need to have all colours present in the beam first either by mixing a red or laser with an laser, or using a White Light laser (which produces red, yellow, green and blue light on a number of lines).